Stop/Tail Light And Turn Signal Light; Tail Light - Hyundai Elantra 2013 Owner's Manual

3. Loosen the assembly retaining nuts.
4. Remove the rear combination light
assembly from the body of the vehicle.
Turn signal
OMD070033

Stop/Tail light and turn signal light

5. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
6. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
OMD070034
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.

Tail light

Tail light
5. Remove the socket from the assembly
by turning the socket counterclockwise
Stop/Tail
until the tabs on the socket align with
the slots on the assembly.
6. Remove the bulb by pulling it out.
7. Inset a new bulb by insetring it into the
socket.
8. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
OMD070035N
clockwise.
Maintenance
7 63