Main Fuse; Multi Fuse - Hyundai Elantra 2013 Owner's Manual

Maintenance
3. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
HYUNDAI dealer.
CAUTION
After checking the fuse panel in the
engine compartment,
install the fuse panel cover. If not,
electrical failures may occur from
water contact.
7 52
securely

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of the
same rating.
5. Reinstall in the reverse order of
removal.
OMD070021

Multi fuse

If the multi fuse is blown, it must be
removed as follows:
1. Remove the fuse panel in the engine
compartment.
2. Remove the nuts shown in the picture
above.
3. Replace the fuse with a new one of the
same rating.
4. Reinstall in the reverse order of
removal.
✽ ✽ NOTICE
If the main or multi fuse is blown, con-
sult an authorized HYUNDAI dealer.
OMD070022