Rear View Camera (If Equipped); Hazard Warning Flasher - Hyundai Elantra 2013 Owner's Manual

Hide thumbs Also See for Elantra 2013:
Table of Contents

Advertisement

Features of your vehicle

REAR VIEW CAMERA (IF EQUIPPED)

The rearview camera will activate when
the back-up light is ON with the ignition
switch ON and the shift lever in the R
position.
This system is a supplemental system
that shows behind the vehicle through
the monitor while backing-up.
4
60
WARNING
• This system is a supplementary
function only. It is the responsibil-
ity of the driver to always check
the inside/outside rearview mirror
and the area behind the vehicle
before and while backing up.
• Always keep the camera lens
clean. If the lens is covered with
foreign matter, the camera may
OMD040091
not operate normally.
✽ ✽ NOTICE
The rearview camera may not operate
normally, in extremely high or low
temperatures (operating temperature :
-13°F~149°F (-20°C~65°C)).
OMD040092N

HAZARD WARNING FLASHER

OMD060001N
The hazard warning flasher should be
used whenever you find it necessary to
stop the car in a hazardous location.
When you must make such an emer-
gency stop, always pull off the road as far
as possible.
The hazard warning lights are turned on
by pushing in the hazard switch. This
causes all turn signal lights to blink. The
hazard warning lights will operate even
though the key is not in the ignition
switch.
To turn the hazard warning lights off,
push the switch a second time.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents