Seat Warmer (If Equipped) - Hyundai Elantra 2013 Owner's Manual

Removal
To remove the headrest, raise it as far as
it can go then press the release button (1)
while pulling upward (2).
To reinstall the headrest, put the head-
rest poles (3) into the holes while press-
ing the release button (1). Then adjust it
to the appropriate height.
WARNING
Make sure the headrest locks in
position after adjusting it to proper-
ly protect the occupants.
■
Type A
■
Type B
OMD030011

Seat warmer (if equipped)

The seat warmer is provided to warm the
front seats during cold weather. With the
ignition switch in the ON position, push
either of the switches to warm the driver's
seat or the front passenger's seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
Safety features of your vehicle
HIGH • Each time you push the button, the
temperature setting of the seat is
changed as follows :
OFF → HIGH(
LOW
• The seat warmer defaults to the OFF
position whenever the ignition switch is
turned on.
OMD030014N-1
✽ ✽ NOTICE
HIGH
With the seat warmer switch in the ON
position, the heating system in the seat
turns off or on automatically depending
on the seat temperature.
LOW
OMD030014
) → LOW(
)
3 9