Features of your vehicle
Seat belt warning
The driver's seat belt warning light and
chime will activate to the following table
when the ignition switch is in "ON" posi-
tion.
Conditions
Warning Pattern
Vehicle
Seat Belt
Light-Blink
Speed
Unbuckled
6 seconds
Buckled
6 seconds
Below 3 mph
6 seconds
(5 km/h)
Buckled →
3 mph~
6 seconds
Unbuckled
6 mph
Above 6 mph
6 sec. on / 24 sec. off
(10 km/h)
(11 times)
Above 6 mph
(10 km/h)
6 seconds *
↓
Unbuckled
Below 3 mph
(5 km/h)
4
52
*
1
Warning pattern repeats 11 times with
interval 24 seconds. If the driver's seat
belt is buckled, the light will stop within
6 seconds and chime will stop immedi-
ately.
*
2
The light will stop within 6 seconds and
chime will stop immediately.
Chime-
Sound
None
None
1
↓
Stop *
2
Turn signal indicator
The blinking arrows on the instrument
panel show the direction indicated by the
turn signals. If the arrow comes on but
does not blink, blinks more rapidly than
normal, or does not illuminate at all, a
malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.
High beam indicator
This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.
Tail light indicator
This indicator illuminates when the tail
lights are on.