Care And Maintenance; Troubleshooting Guide - Shark V1730CR Owner's Manual

Care and Maintenance

To improve the performance and life of your unit, we recommend you do the
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the
dust container fits into. Remove any hair, fiber or other materials that may have
built up in the chamber, on the rotating brush or edging tool.
2. Don't use abrasive materials to clean the sweeper. Do not immerse the unit in
water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don't pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE REASON
1. Batteries discharged.
2. No power in electrical
SWEEPER WILL NOT
outlet supplying charging
OPERATE
adapter.
3. Unit needs servicing.
SWEEPER WILL NOT 1. Dust container is full.
PICK-UP 2. Unit needs recharging.
DUST ESCAPING
1. Dust container is full.
FROM SWEEPER
ROTATING BRUSH 1. Unit clogged.
WILL NOT PICK UP 2. Dust container is full.
1. Electrical outlet not
working
SWEEPER WILL NOT 2. Charging Adapter not
CHARGE working
3. Batteries no longer
functioning
POSSIBLE SOLUTION
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
1. Empty dust container.
2. Charge unit.
1. Empty dust container.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust
container.
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter
3. See battery disposal pg. 8.
9
Modèle : V1730CR
7,2 volts CC
1. Électrobrosse balayeuse
2. Bouton de mise en marche
3. Contrôleur de vitesse
4. Témoins de
chargement/vitesse
5. Brosse rotative
6. Couvercle de la brosse
7. Outil à angle
8. Boîtier de vitesse
Les illustrations peuvent différer du produit lui-même.
REMARQUE: Les piles de la balayeuse sans fil de modèle
V1730CR ne sont pas chargées avant sa sortie
d'usine. L'appareil doit être chargé pendant 20
heures avant la première utilisation. N'utilisez que
les piles de rechange
9. Coupelle à poussière
10. Prise de chargement
11. Poignée inférieure
12. Tube de rallonge (3)
13. Poignée supérieure
14. Adaptateur de chargement
15. Phare
XBP615
.
22