Table of Contents
Advertisement
Available languages
Available languages
Copyright © EURO-PRO OPERATING LLC 2008
Cordless Sweeper
Barredora Electrónica
Models/
Modelos:
V1950-V1950SP
7.2 Volt DC – 7,2 Voltios CC
To Maximize the life of your NiCd batteries:
1. Charge for a minimum of 20 hours before initial use.
Failure to do so will reduce the product's battery life
significantly.
2. Do not store unit with the charging adapter attached
and plugged in.
3. Only recharge when the batteries are fully discharged
(or as close to fully discharged as possible).
4. Do not store in areas of high temperature or humidity.
5. After 3 months of non-use, the product should be fully
discharged and then recharged to maximize battery
power.
6. Use only the charger supplied with the product. If other
chargers are used, the batteries can fail causing damage to
the battery, product, or personal property.
NiCd batteries have a long useful life but at some time they
will need to be replaced. To purchase replacement batteries,
visit www.sharkclean.com
Note: 1. The On/Off switch must be in the "Off" position in
order to charge the unit. If the charging indicator
does not light, depress the On/Off switch once.
2. If the product has never been used or has been
stored for an extended period of time without use – it
will take several complete charge and discharge
cycles to realize the full operational time of your
product.
EURO-PRO Operating LLC
Boston, MA 02465
Tel. : 1 (800) 798-7398
www.sharkclean.com
Advertisement
Table of Contents
Related Manuals for Shark V1950
Summary of Contents for Shark V1950
- Page 1 Cordless Sweeper Barredora Electrónica Models/ Modelos: V1950-V1950SP 7.2 Volt DC – 7,2 Voltios CC To Maximize the life of your NiCd batteries: 1. Charge for a minimum of 20 hours before initial use. Failure to do so will reduce the product’s battery life significantly.
-
Page 2: Parts List
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS SWEEPER. When using an electrical appliance, basic safety precautions should always be observed, including the following: WARNING To reduce the risk of fire, electrical shock, or injury: Do not charge this unit outdoors. Do not use outdoors or on wet surfaces. -
Page 3: Assembling Cordless Sweeper
OPERATING INSTRUCTIONS Assembling Your Cordless Sweeper Your cordless sweeper will require very little assembly. You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing. (Pg. 2) This will help you in the assembly and operation of your cordless sweeper. -
Page 4: Maximize Life Of Ni-Cd Batteries
OPERATING INSTRUCTIONS To Maximize The Life Of Your Ni-Cd Batteries 1. Charge for a minimum of 20 hours before initial use. Failure to do so will reduce the product’s battery life significantly. 2. Do not store the unit with the charging adaptor attached and plugged in. 3. -
Page 5: Cleaning Dust Container
OPERATING INSTRUCTIONS 3. To release the handle to a comfortable position, gently apply pressure to the top of the sweeper head with your foot while pulling back on the handle. (Fig. 9) 4. To change the speed of the brush roll, press the speed control button once. One light “On”... -
Page 6: Changing Rotating Brush/Gear Box & Squeegee
OPERATING INSTRUCTIONS Changing The Rotating Brush, Gear Box & Squeegee 1. Remove the extension tube handle from the sweeper power head. 2. Turn the sweeper power head upside down being careful not to accidentally turn the unit “On”. 3. Remove the brush cover. 4. -
Page 7: Troubleshooting Guide
By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions. V1950 – V1950SP _______________________________________________________________________________ Appliance model... -
Page 8: Medidas Importantes De Seguridad
MEDIDAS IMPORTANTES DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR SU BARREDORA INALÁMBRICA. Al usar aparatos eléctricos, siempre debe seguir precauciones básicas de seguridad, incluyendo las siguientes: ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o daños personales: 1. -
Page 9: Instrucciones De Uso
INSTRUCCIONES DE USO Armado de su Barredora Inalámbrica Su barredora inalámbrica requiere muy poco armado. Deberá sacarla de la caja y familiarizarse con todos los componentes listados en el diagrama descriptivo. (Pág. 14) Esto le ayudará en el armado y operación de su barredora inalámbrica. Nota : El cargador puede venir guardado dentro del recipiente para la tierra. - Page 10 INSTRUCCIONES DE USO Cómo Maximizar la Vida de sus Baterías de Ni-Cd 1. Cárguelas por un mínimo de 20 horas antes de usarlas por primera vez. El no hacer esto reducirá considerablemente la vida útil de las baterías. 2. No guarde la unidad con el cargador conectado y enchufado. 3.
- Page 11 INSTRUCCIONES DE USO 3. Para ajustar el mango a una posición confortable, aplique suavemente presión en la parte superior del cabezal con su pie mientras tira del mango hacia atrás. (Fig. 9) 4. Para cambiar la velocidad de la barredora, presione el botón de velocidad. Al presionarlo, la luz indicadora de velocidad cambiará.
- Page 12 INSTRUCCIONES DE USO Cambio del Cepillo Giratorio, Engranajes y Escobilla de Goma 1. Quite el tubo de extensión del cabezal eléctrico de la barredora. 2. De vuelta el cabezal eléctrico teniendo cuidado para no encenderlo accidentalmente. 3. Quite la cubierta del cepillo. 4.
- Page 13 El registro nos permitirá contactarnos con usted en caso de existir alguna notificación de seguridad con respecto al producto. Retornando esta tarjeta usted reconoce haber leído y entendido las instrucciones de uso y advertencias incluidas en estas instrucciones. _______________________________________________________________________________ V1950 – V1950SP Modelo del Artefacto _______________________________________________________________________________ Fecha de compra _______________________________________________________________________________ Nombre del Dueño...