Care And Maintenance - Shark Z1900 Series Owner's Manual

Care and Maintenance

AFTER USE AND STORAGE
1 When you have finished using the Shark
Steam Pocket Mop, unplug the cord from the
™
outlet and let the unit cool 2-3 minutes. Release
the residual steam by pumping the handle
several times before removing the microfibre
cleaning pocket from the mop head.
fig. 12
2 Remove the microfibre cleaning pocket by
releasing the hook and loop fasteners and
using the lavender loop on the side of the
pocket to pull off. Avoid contact with the hot
pocket or dirt. Then empty the water tank.
(Fig. 12)
3 To store the Shark
®
hanging up; first remove the head (after it has
cooled and the steam has been released) then
hang on a large hook. (Fig. 13)
NOTE: If you want to store it standing upright,
then make sure it's leaning against a wall
for added support and safety. Always store
your Shark Steam Pocket
®
microfibre cleaning pocket removed and away
from children or high traffic areas.
®
fig. 13
Steam Pocket Mop
™
Mop with the
™
fig. 14
fig. 15
CARE OF YOUR CLEANING POCKET
1
We recommend washing your microfibre
cleaning pockets separately from other fabrics
to avoid picking up lint. Only use liquid
detergent (no powder detergent). Do not
use any fabric softeners or bleach. Line dry.
(Fig. 14)
2
If there are loose threads on the cleaning pocket
carefully cut the thread with scissors. Do not pull
on them or cut at the base. (Fig. 15)
IMPORTANT: The cleaning pocket may be very
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes before removing
the cleaning pocket.
AVOIDING CALCIFICATION IN YOUR STEAM
MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
7