Setting The Volume - Motorola MTP850 User Manual

Handportable terminal
Hide thumbs Also See for MTP850:
Table of Contents

Advertisement

Upon entry into this sub-menu, the display shows the current
ring style used.
Scroll to the desired style and press Select. You will hear the
new ring style immediately for a few seconds. If necessary,
adjust the volume level.

Setting the Volume

This sub-menu allows you to adjust the
Simplex, Duplex, Earpiece, Speaker, and
General tone volume.
To set the volume:
1. From the main menu, select Setup
> Set Volume.
2. Scroll through the list.
3. Choose the required item, and press Change.
4. Adjust the level with the left arrow to decrease and the right
to increase the volume. A feedback tone is heard, and a
volume level bar is displayed.
5. Press Back to exit.
If the display shows only one option Volume, user can adjust all
of the above settings at once. User has the option to change the
settings individually when the Volume Adj. Mode is set to
Individual. More information please go to "Setting Volume
Adjustment Mode" on page 132.
The volumes for the Call-Out messages are not adjustable.
When the battery level is low it is not recommended to attached
the 4 Ohm speaker to the radio as it can cause reset or
shutdown of the radio.
128
Volume
Duplex Vol: 0_
Simplex Vol: 1_
Earpiece Vol: 1_
Speaker Vol: 0_
General Vol: 0_
Change
Done

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtp850 fug tetra

Table of Contents