Motorola MTP850 User Manual page 89

After the Hot Microphone time period expires, or if you press
PTT during the Hot Microphone period, or if you press End
soft key: the Emgcy Mic Ended message will be displayed.
The talk session ends. To resume, press the Emergency
button again. Your radio can also resume the Hot Mic session
automatically when the Alternating Hot Mic feature is
enabled. Talk permit time is granted without any user
interaction. The same screen indication is displayed as for
regular Hot Mic.
Talk time and resume Hot Mic time is specified by your Service
Provider.
If talk permit is granted to another member of
the group, an "Emergency call received" tone
will be heard. If configured by your Service
Provider, your MTP850 will automatically
attempt to get talk permit again and the Wait
For Mic message will be displayed.
During this pending time the MTP850 microphone is not active
until the Emgcy Mic On message is displayed again.
Hot Microphone feature is available in DMO and TMO modes.
Receiving an Emergency Group Call
A terminal in TMO receives an Emergency Group Call to the
selected group, associated ATG (Announcement Talkgroup),
or scanned group. If the ATG is the currently selected group,
the terminal will receive the Emergency Group Call to the
group associated with this ATG. (For information on the ATG,
see page 42.)
When the MTP850 receives the call, the display will show
Emgcy In Use and the caller's identity.
If upon entering Emergency Mode, your MTP850 receives an
Emergency call, and Hot Microphone was enabled by your
Service Provider, the Wait For Mic message will be
displayed. Your MTP850 will attempt to get a talk permit.
Emgcy In Use
ID:David
Wait For Mic
Optns Exit
81