Installing The Fan Board; Figure 68. Installing The Fan Board Into The Server System - Intel SR1600UR Service Manual

Installing the Fan Board

To install the fan board, follow these steps:
1. Lower the fan board into the system (see letter "A" in
fan board over the retention pins as shown.
2. Slide the fan board to the left (see letter "B" in
install the screw (see letter "C" in
3. Connect the power cable to the power connector on the fan board (see letter "D" in
Figure
4. Connect the fan cables to the fan board.
5. Install the processor air duct. For instructions, see
Duct" on page
6. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
®
Intel Server System SR1600UR Service Guide
68).
B

Figure 68. Installing the Fan Board into the Server System

47.
Figure
Figure 68) to lock it in place and
Figure 68).
D
C
A
AF002906
"Installing the Processor Air
42.
68) and position the
77