Table of Contents
Advertisement
4.5.3 CONTROL TAB (CONFIGURE STATUS LED'S AND MOTION
DETECTION SENSITIVITY)
The Control tab allows you to configure the camera status LED's to make the camera
harder to spot at night. It also allows you to configure the motion detection sensitivity
when using video motion detection.
To configure the camera status LED's:
1. Right-click the camera in Camera List and click Video settings. Then, select the
Control tab.
2. Under Status LED Control, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see "Camera
Overview" on page 1.
• Always turn off: LED's are turned off at all times.
• Turn off after connected: LED's turn on when the camera is powered on and turn off
once a network connection is made.
3. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. Click OK to exit the settings window.
NOTE: The camera may reboot after settings are changed. Wait about 30 seconds and
then double-click the camera in Camera List or Auto Search to reconnect to the camera.
To configure motion detection sensitivity:
NOTE: The following method works when using video motion detection. It does not work
when using PIR motion detection. For details on enabling motion detection and selecting
video motion detection or PIR, see "Schedule" on page 143.
1. Right-click the camera in Camera List and click Video settings. Then, select the
Control tab.
Configure status LED's
Configure motion detection
sensitivity from 1 (High) to 10 (Low)
L-View for Mac
63
Hide quick links:
Advertisement
Table of Contents
