Configuring Motion Detection Sensitivity - Lorex LW3400 Series User Manual

Select Single Channel for the monitor to record
only the channel that detects motion in full-screen.
During recording, motion detection is
disabled on non-recording channels if
this setting is selected.
When recording is finished, the monitor returns to
Quad Mode.
Configuring Motion Detection
Sensitivity
Motion Detection Sensitivity determines how
much motion is required to trigger Auto
Recording or audio alarms.
To select Motion Detection Sensitivity:
1
Press
Select Low, Medium, or High sensitivity
2
and press on the joystick. Higher sensitivity
means less motion is required to trigger
recording and alarms.
It is recommended to try different settings
to find the one that works best for you.
, then select Detecting.
29
Select
Detecting