Lorex Live LNC100 Series User Manual page 71

2. Camera List: Shows cameras that have been saved in L-View. Double-click cameras
to connect to them.
NOTE: To connect to multiple cameras, click to select a display area. The top of the
selected area turns orange. Then, double-click the camera to open it in the selected
area.
Then, double-click
a camera to open it
3. Auto Search List: Auto Search shows cameras located on your local network (LAN).
• Double-click the camera ID to view the camera.
• Drag the camera to the Camera List to save the camera.
• Right-click the camera ID and select Web configure to configure the camera settings
using a browser. See "Configuring Camera Settings using a Web Browser" on
page 133.
4. Recording Controls:
• Record: Click to start/stop manual recording. For details, see "Recording Video
to your Mac's Hard Drive" on page 57.
• Folder: Click to open the recording folder for this camera. For details, see
"Playing Back Video from your Mac's Hard Drive" on page 58.
5. Display Area: Shows video from your camera.
• Double-click to view the camera in full-screen; double-click again to exit full-screen.
• Right-click and click Stop to close the selected camera.
• Click a display area to select it. The top of the area turns orange. L-View plays audio
from the camera in the currently selected area.
Right-click the camera ID and select Web
configure to open the Web Configuration tool
L-View for Mac
Click to select a
display area
55