Editing Camera Wifi Network Settings - Lorex Live LNC100 Series User Manual

3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

7.4.9 EDITING CAMERA WIFI NETWORK SETTINGS

Configure WiFi network settings for the camera. To setup the camera with a WiFi
network, see "Android WiFi Setup" on page 26.
To edit camera WiFi settings:
1. In Camera List, tap
2. Tap Camera Settings.
Select DHCP (recommended)
or Static for a fixed IP address
If Static, configure IP address
information as needed
next to the camera you would like to edit.
Android App
123