Led Control - Lorex Live LNC100 Series User Manual

Configuring Camera Settings using a Web Browser
1. Under Web access port, enter the desired web access port. It must not be used by
any other device on your network. Note that L-View will automatically update the web
access port when connecting to Web Configure on the local network.
2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power
adapter or pressing the Reboot button (see "Reboot" on page 153).

8.5.2 LED CONTROL

Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night.
To configure the LED's:
1. Select one of the following:
• Normal LED display: LED's will function as normal. For details on LED functions,
see "Camera Overview" on page 1.
• Turn off LED display always: LED's are turned off at all times.
• Turn off LED display after network connected: LED's turn on when the camera is
powered on and turn off once a network connection is made.
2. Click Save & Apply to apply settings to the camera.
150