Paging Other System Users; Enabling Or Disabling The Page Feature - Mitel 5320 User Manual

Paging Other System Users

You can place page announcements through phone speakers or external speakers (if
applicable). Your system may use page zones to prevent announcements from transmitting
through every phone in the system. Each page zone contains a different combination of
extensions and external paging equipment.
Contact your system administrator for page zone information. You can use the following table to
save the page zone information for future reference.
Placing a Page Announcement
The following instructions describe how to place a page announcement.
To place a page announcement:
1. Press 7.
2. Enter the page-zone number (0 to 9).
3. Wait for the tone, make your announcement, and then hang up.

Enabling or Disabling the Page Feature

You can enable or disable the Page feature for your extension. If your extension is assigned to
more than one page zone, the Page on/off feature code enables or disables your extension for
all pages zone (you cannot select individual zones).
To enable or disable paging for your IP phone:
Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 5, February 2011
Page Zone Name
Dial 325 to enable paging. PAGE RECEIVE ON appears. Dial 325 again to disable
paging.
Number
Messages
Description
Page 71