Ubee DDW366 User Manual page 52

Ubee Interactive
5. Enter information in the forwarding fields as shown in the screen shot below. Field
descriptions follow.
Local IP Address
Local Start Port
Local End Port
External IP Address
External Start Port
External End Port
Protocol
Description
Enabled
Cancel
Apply
Ubee DDW366 Dual-Band-Concurrent Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines the IP address of the local LAN device to which the
forwarding rule applies. For example, an Xbox or PC.
Defines the starting port number listened to by the server host
located in your LAN.
Defines the ending port number listened to by the server host
located in your LAN.
Designates another router on the network through which to
forward data.
Defines the port number to start the range of ports to publish
to the Internet.
Defines the port number to end the range of ports published to
Internet.
Note: Be very careful with ranges. Ports within a range are not
usable by other applications that may require them. It is
common and safer to enter the same port number as the start
and end of the range.
Selects the protocol type. Options are UDP, TCP, or BOTH.
Names the forwarding rule.
Disables (Off) or enables (On) the forwarding rule.
Stops creating the forwarding rule and returns you to the
previous Forwarding screen.
Saves changes.
Using the Forwarding Option
Description
48