43-2002.fm Page 8 Tuesday, June 29, 1999 7:16 AM
2. Plug one end of the supplied coiled cord into the
the back of the unit and the other end into the telephone's
base.
3. To connect a computer, plug one end of the supplied PC con-
necting cable into the
and the two ends into the computer's sound card (red micro-
phone pin into microphone jack and black LINE OUT pin into
LINE OUT jack).
Notes:
• If your sound card does not have a LINE OUT jack, use its
SPEAKER jack instead.
• Use another cable (not supplied) to connect the modular
telephone line jack to the computer's modem. You can use a
duplex adapter to connect the existing line cord and the
modem line to the modular telephone line jack.
• Only sound from the sound card's LINE OUT (or SPEAKER)
jack is amplified (and can be recorded using a connected
audio recorder).
4. To connect an audio recorder, plug one end of the supplied
audio cord into the
input jack.
Note: It is illegal in some states to record a conversation with-
out the consent of all parties to the conversation, including the
phone company. Check the laws in your area before using the
two-way record feature.
5. Plug the headset's cord into the
of the control unit.
ATTACHING THE HEADSET HANGER
The Handsfree Headset Amplifier includes a headset hanger that
gives you a convenient place to store the headset when you are
not using it.
8
jack on the back of the control unit,
PC
jack and the other end into the device's
AUX
HEADSET
jack on
TEL
jack on the right side