Table of Contents
Advertisement
43-2002.fm Page 9 Tuesday, June 29, 1999 7:16 AM
To attach the hanger, make all connections, then push its end into
the hole on the back of the control unit until it clicks.
Note: If you try to attach the hangar before all connections are
made, the hanger might interfere with plug insertion.
ADJUSTING THE HEADSET
1. Place the headset over your head with the earpiece on either
ear.
2. Adjust the headset band until it rests
with almost no pressure on your ear
and the top of your head. If the head-
set is loose, remove it and push the
band in slightly to tighten it. If it is
tight, gently pull the band out to
loosen it.
3. Hold the headset in place and adjust
the microphone boom until it is even
with your chin, with the white dot
toward your mouth. Experiment until
you find the most comfortable posi-
tion.
Note: The microphone boom swivels
on the headset. Do not bend the
microphone boom while you adjust it.
9
Advertisement
Table of Contents
