Safety Belts; Safety Belts: They Are For Everyone - Pontiac Montana SV6 2008 Owner's Manual

Table of Contents

Advertisement

2. Firmly push the rear latches into the rear floor pins
by pushing down on the rear of the seat.
CAUTION:
{
A seat that is not locked into place properly
can move around in a collision or sudden stop.
People in the vehicle could be injured. Be sure
to lock the seat into place properly when
installing it.
3. Try to raise the seat to make sure that it is locked
down. The indicator pins will no longer stick out
when the seat is properly latched into place.
CAUTION:
{
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.
4. Return the seatback to its upright position. See
"Returning the Seatback to an Upright Position"
earlier in this section.
1-22

Safety Belts

Safety Belts: They Are for Everyone

This part of the manual tells you how to use safety
belts properly. It also tells you some things you should
not do with safety belts.
CAUTION:
{
Do not let anyone ride where he or she cannot
wear a safety belt properly. If you are in a
crash and you are not wearing a safety belt,
your injuries can be much worse. You can hit
things inside the vehicle harder or be ejected
from it and be seriously injured or killed. In
the same crash, you might not be, if you are
buckled up. Always fasten your safety belt,
and check that your passenger(s) are
restrained properly too.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 montana sv6

Table of Contents