Power Winch Platform (If Equipped) - Hummer H2 2004 Owner's Manual

Power Winch Platform (If Equipped)

You can use the power winch platform with an
aftermarket winch. Connect the winch to the platform
and wiring to the vehicle following the winch
manufacturer's guidelines.
1. Slide the winch platform into the front receiver of
your vehicle. To secure it, follow the next step.
You will be using the winch pin (if equipped) stored
with the jack/tool kit. See Changing a Flat Tire
on page 5-76 for more information on location.
2. Slide the pin down through the hole in the front
bumper and into the receiver.
If you look under the
receiver, you will see
the locking portion (clip)
of the pin coming
through the bottom
hole in the receiver.
3. Turn the clip so that
it is perpendicular to
the pin. Pin is
shown off the vehicle
for clarity.
4-59