Table of Contents
Advertisement
After the network connection is built, the next step is setup the router with proper network
parameters, so it can work properly in your network environment. Before you connect to the
wireless router and start configuration procedures, your computer must be able to get an IP
address from the wireless router automatically (use dynamic IP address). If it's set to use
static IP address, or you're unsure, please follow the below instructions to configure your
computer with dynamic IP address:
If the operating system of your computer is....
Windows 2000
Windows XP
Windows Vista/Win7
2.3.1
Windows 2000
Click "Start" button (it should be located at lower-left corner of your computer), then click
control panel. Double-click Network and Dial-up Connections icon, double click Local Area
Connection, and Local Area Connection Properties window will appear. Select "Internet
Protocol (TCP/IP)", then click "Properties".
1.
Select "Obtain an IP address automatically" and "Obtain DNS server address
automatically", then click "OK".
http://www.sapido.com.tw/
- please go to section 2.3.1
- please go to section 2.3.2
- please go to section 2.3.3
13
User Manual v1.0.0
Hide quick links:
Advertisement
Table of Contents
