Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sapido GR-1733
Summary of Contents for Sapido GR-1733
- Page 1 User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 2: Fcc Statement
IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cm between the radiator & your body. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 3 "Council Directive on the Approximation of the Laws of the Member Sates relating to Electromagnetic Compatibility" (89/336/EEC; 92/31/EEC; 93/68/EEC). The Declaration of Conformity can be found at the Sapido regional website. www.sapidotech.de CE Information of Disposal The electric and electronic equipment or unit which is labeled with crossed-out wheeled bin may not be disposed of with household waste.
-
Page 4: Table Of Contents
Build Network Connection ..................10 2.1.1 Router Mode...................... 10 2.1.2 AP Mode ......................11 2.1.3 Wi-Fi AP Mode....................11 Connecting SAPIDO GR-1733.................. 11 Network setup ......................12 2.3.1 Windows 2000....................13 2.3.2 Windows XP ...................... 14 2.3.3 Windows Vista / Windows 7 ................15 Router IP Address Lookup.................. - Page 5 6.4.2 Event Log ......................74 Logout ........................75 Chapter 7 Samba Server ......................76 How to use SAPIDO GR-1733 as a Samba server..........76 Chapter 8 DDNS Service Application..................77 Chapter 9 Q & A .......................... 82 Installation ......................... 82 LED ..........................
- Page 6 Wireless LAN ......................86 Support ........................88 Others......................... 89 USB Device ........................ 89 Chapter 10 Appendices........................ 90 10.1 Operating Systems ....................90 10.2 Browsers........................90 10.3 Communications Regulation Information .............. 90 User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 7: Chapter 1 Introduction
Storage: -20ºC ~70ºC (-4ºF ~158ºF) Humidity Operating: 10% to 85% Non-Condensing Storage: 5% to 90% Non-Condensing Dimension 198 x 107 x 39 mm (4.65 x 2.75 x 0.98 inch) (Antenna not included) Management Web GUI, Firmware upgrade via web User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 8: Product Appearance
Status System ready Reset / Firmware updates in progress Ethernet connected Transmitting Data LAN (1~4) Ethernet connected Transmitting Data Green: Transmitting Data WIRELESS & WPS Operation OK Orange: WPS enabled λ λ λ λ The Rear User Manual v1.0.0 http://www.sapido.com.tw/... - Page 9 Power DC Jack DC 12V power in Reset Button Press for back to factory default USB Port For 3G/4G modem only Ethernet Port (LAN 1~4) RJ-45 Ethernet 10/100/1000 Ports Ethernet Port (WAN) RJ-45 Ethernet 10/100/1000 Port User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 10: Chapter 2 System And Network Setup
Chapter 2 System and Network Setup The SAPIDO GR-1733 is an easy to setup and wireless device for various application and environment, especially for large installs such as hotels, offices space, warehouses, hot-spots and more. To begin with SAPIDO GR-1733, you must have the following minimum system requirements. -
Page 11: Ap Mode
Wi-Fi AP Mode Switch to WiFi AP Mode when you connect to the internet wirelessly through PC and wireless device without wireless LAN function equipped. Connecting SAPIDO GR-1733 Prepare the followings before the connection: λ λ λ λ PC or Notebook for setup λ... -
Page 12: Network Setup
Make sure you are under “Router Mode”. Connect SAPIDO GR-1733 to xDSL/ Cable modem with the Ethernet cable, WAN to LAN. Turn on your Computer. Network setup User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 13: Windows 2000
Double-click Network and Dial-up Connections icon, double click Local Area Connection, and Local Area Connection Properties window will appear. Select “Internet Protocol (TCP/IP)”, then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 14: Windows Xp
Double-click Network and Internet Connections icon, click Network Connections, then double-click Local Area Connection, Local Area Connection Status window will appear, and then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 15: Windows Vista / Windows 7
Click View Network Status and Tasks, and then click Manage Network Connections. Right-click Local Area Network, then select “Properties”. Local Area Connection Properties window will appear, select “Internet Protocol Version 4 (TCP / IPv4)”, and then click “Properties”. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 16: Router Ip Address Lookup
Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. Router IP Address Lookup After the IP address setup was completed, please clicks “start” → “run” at the bottom-lower corner of your desktop: User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 17: Log Into Web Gui
IP address of the wireless router in address bar, and the following message should be shown. Please click “admin” to login the SAPIDO GR-1733. Enter the User name and Password in to the blank and then Click Login. The default values for User Name and Password are admin (all in lowercase letters). - Page 18 User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 19: Chapter 3 Internet Connection
Web login password: admin Plug and Play The SAPIDO GR-1733 supports four types of Internet connection method: 3G modem card, wire or wireless connection via xDSL/Cable modem. Just connect the 3G modem card or Ethernet cable to SAPIDO GR-1733, the router will recognize it automatically. -
Page 20: Router Mode- Using As A Broadband Router
2. Google Android Phone: please turn on "USB modem mode” when connecting router. 3. Window Mobile Phone: please enable “USB to PC” function. Router Mode- Using as a broadband router User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 21: Wan Interface- Ethernet Port
The WAN access type is depended on the service that you contract with the provider. The SAPIDO GR-1733 provides five selections for the WAN access type, Static IP, DHCP Client, PPPoE, PPTP and L2TP. Check with your ISP if you don’t know the WAN type. - Page 22 IP Address Enter the IP address which is provided by your ISP. Subnet Mask Please enter the Subnet Mask address Default Gateway Input ISP Default Gateway Address, . Input DNS information which is provided by your ISP User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 23: Dhcp Client
Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. 3.2.1.2 DHCP Client Item Description WAN Access Type Select "DHCP Client" User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 24: Pppoe
MAC address registered to the provider to "Clone MAC Address" Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. 3.2.1.3 PPPoE User Manual v1.0.0 http://www.sapido.com.tw/... - Page 25 MAC address registered to the provider to "Clone MAC Address" Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 26: Pptp
3.2.1.4 PPTP Item Description WAN Access Type Select "PPTP" Server IP Address Input your server IP address provided by your ISP. If you don’t know, please check with your ISP. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 27: L2Tp
MAC address registered to the provider to "Clone MAC Address" Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. 3.2.1.5 L2TP User Manual v1.0.0 http://www.sapido.com.tw/... - Page 28 Input the password provided by your ISP. Select Attain DNS Automatically. Or select Set DNS Manually, if you want to specify the DNS, and enter the DNS provided by your ISP in DNS 1 2 3. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 29: Advance Function
This option is to enable Web Server Access function on WAN. on WAN 3.2.2 WAN Interface- 3G USB dongle Select WAN under the IP Config menu, and choose 3G usb dongle for the WAN Interface. Its associated setting will show as below. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 30 MAC address registered to the provider to "Clone MAC Address" Always / Dial on demand If your 3G USB adapter is a pay-as-you-go plan base, select “Dial on demand” and disconnect the connection when you don't use the User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 31: Wan Interface- Wireless
Click “Finish” to complete the setting Rebooting this product is started. Please wait for a while. 3.2.3 WAN Interface- Wireless Select WAN under the IP Config menu, and choose wireless for the WAN Interface. Its associated setting will show as below. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 32: Ap Mode-Using As A Access Point
MAC address registered to the provider to "Clone MAC Address" Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. AP Mode-Using as a Access Point User Manual v1.0.0 http://www.sapido.com.tw/... - Page 33 Enter the User name and Password in to the blank and then Click Login. The default values for User Name and Password are admin (all in lowercase letters). Select LAN under the IP Config menu User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 34: Wifi Ap Mode- Using As A Network Converter
Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. WiFi AP Mode- Using as a Network Converter Make sure to shift the mode into WiFi AP Mode. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 35 The default gateway is and for User Name and Password are admin (all in lowercase letters). Click Login to enter. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 36 MAC address registered to the provider to "Clone MAC Address" Apply Change & Reset Click on Apply Change to save the setting date, or you may click on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 37: Chapter 4 Wireless Setup
Chapter 4 Wireless Setup Wireless Setup There are two ways to setup wireless LAN with SAPIDO GR-1733. You can use either way to setup Wireless LAN. 4.1.1 Setup Wireless LAN by WPS button You can setup wireless LAN easily by using the WPS button if both WLAN router and the WLAN adapter (client) are WPS supported. - Page 38 (4) Setup without WPS button if you wireless adapter has only virtual WPS function. (5) Open Wireless adapter utility. (6) Press the WPS button (A) from SAPIDO GR-1733 and wait for Wireless/WPS LED light (B) changed into orange. (7) Back to the WLAN adapter utility and click its “PBC”...
-
Page 39: Wireless Basic Setup From Web Gui
(9) After completes the WPS setup. Please confirm that it can be connected to the Internet. Note: The setup image might be some differences when using other branded Adapter. 4.1.2 Wireless Basic Setup from Web GUI The Wireless Basic Settings include Band, Mode, SSID, Channel Number and other wireless settings. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 40 Turn off the wireless service. Interface Band Select the frequency. It has 6 options: 2.4 GHz (B/G/N/B+G/G+N/B+G+N). Mode Select the mode. It has 3 modes to select: (AP, Client, WDS, AP+WDS). Multiple AP: Please check Section 4.1.2.1. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 41: Multiple Aps
4.1.2.1 Multiple APs The SAPIDO GR-1733 can register up to 4 SSIDs (wireless LAN group). It can be used as if there are multiple wireless LAN access points with one product. Each SSID could be set with different data rate, WMM and access type. -
Page 42: Enable Universal Repeater Mode
Enable Universal Repeater Mode The router can act as Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 43: Wireless Security Setup
SSID. Click on Apply Changes to save the settings. (Please disable the DHCP service first) Users can use the Network Configuration page to check the information about “Wireless Repeater Interface Configuration”. Wireless Security Setup User Manual v1.0.0 http://www.sapido.com.tw/... - Page 44 There are five Encryption types supported: “None”, “WEP”, “WPA (TKIP)”, ”WPA2(AES)”, and “WPA2 Mixed”. Enabling WEP can protect your data from eavesdroppers. If you do not need this feature, select “None” to skip the following setting. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 45 It is a safety system by using authentication to protect your wireless network. Encryption- WPA (WPA, WPA2, and WPA2 Mixed), WPA Authentication Mode (1) Enterprise (RADIUS): Please fill in the RADIUS server Port, IP Address, and Password User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 46: Wireless Access Control
Select column and click on “Delete Selected” button. Take the wireless card as the example. (1) Please select Deny Listed in Wireless Access Control Mode first, and then fill in the MAC User Manual v1.0.0 http://www.sapido.com.tw/... - Page 47 MAC Address field. Click Apply Changes to save the setting. (2) The MAC address what you set will be displayed on the Current Access Control List. (3) The wireless client will be denied by the wireless router. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 48: Router Mode Security Setup
Chapter 5 Router Mode Security Setup This section contains configurations for the SAPIDO GR-1733’s advanced functions such as: virtual server, DMZ, and Firewall to provide your network under a security environment. 5.1.1 Virtual Server The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of service port numbers (from the WAN port) to a particular LAN IP address. -
Page 49: Virtual Dmz
DMZ Host IP Address Please enter the specific IP address for DMZ host. Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 50: Firewall
The QoS can let you classify Internet application traffic by source/destination IP address and port number. To assign priority for each type of application and reserve bandwidth can let you have a better experience in using critical real time services like Internet phone, video conference …etc. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 51 Set local IP Address if the address type is by IP Address MAC Address Set MAC Address if the address type is by MAC Address Mode Select Guaranteed minimum bandwidth or Restricted maximum bandwidth Bandwidth Key in the bandwidth. Comment Write your comment here. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 52: Port Filtering
Delete Selected & Delete Click Delete Selected will delete the selected item. Click Delete All will delete all items in this table. Reset You can click Reset to cancel. Port 80 has been blocked as the following illustrate. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 53: Ip Filtering
Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. Current Filter Table It will display all ports that are filtering now. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 54: Mac Filtering
Click Delete Selected will delete the selected item. Click Delete All will delete all items in this table. Reset You can click Reset to cancel. 5.2.5 URL Filtering URL Filtering is used to restrict users to access specific websites in internet User Manual v1.0.0 http://www.sapido.com.tw/... - Page 55 Reset You can click Reset to cancel. Notes: This function will not be in effect when the Virtual Server is enabled. Please disable Virtual Server before activate the URL Filtering function. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 56: Chapter 6 Advanced Setup
WAN is changed, and the information will be updated to DDNS service provider automatically. Service Provider Choose correct Service Provider from drop-down list, here including DynDNS, TZO, ChangeIP, Eurodns, OVH, NO-IP, ODS, Regfish embedded in SAPIDO GR-1733. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 57: Wireless Advanced Setup
In Advanced Settings page, more 802.11 related parameters are tunable. Item Description Fragment Threshold To identify the maxima length of packet, the over length packet will be fragmentized. The allowed range is 256-2346, and default length is 2346. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 58: Wireless Site Survey
ISP. You can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will appear on SSID column in Wireless Basic Setup page. Please click on Refresh to refresh the list. Click Connect after select an existing AP to connect. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 59: Wds Settings
MAC address of other AP / Routers should be entered in the table. The WDS explanation is as the following picture. Setup Router A Please check the MAC address and Channel number from WDS Router A. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 60 (in this example is "6”). Click Apply Changes to save the setting. Enable WDS function from the page – “WDS Setting”, and then fill in the MAC address of Router B. Click Apply Changes to save the setting data. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 61 The WDS AP List will show the WDS device MAC address after reboot. Move on the setup to WDS Router B User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 62 You will receive an IP address from Router A. If you failed the WDS setting, please check you setting with refer to the list below. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 63: Wps
Access Point in a minute without any hassle. SAPIDO GR-1733 could support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function. - Page 64 (3). Click PIN from Adapter Utility to complete the WPS process with the wireless router. Start PBC: (1). Press the WPS button (A) from SAPIDO GR-1733 and wait for Wireless/WPS LED light (B) changed into orange. (2). Press the WPS button (C) from the adapter until the setup window shows up.
-
Page 65: System Management
Please also refer to section 4.1.1 WPS setup for more details. System Management This section including Change Password, Firmware Upgrade, Profiles Save, Time Zone Setting, UPnP Setting, VPN Passthrough Setting, and Language Setting. It is easy and helpful for users making more detailed settings. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 66: Change Password
Caution: To prevent that firmware upgrading is interrupted by other wireless signals and causes failure. We recommend users to use wired connection during upgrading. Note: The firmware upgrade will not remove your previous settings. λ λ λ λ Reset button: User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 67: Profile Save
This is especially useful in the event you need to reset the router to its default settings. Save Configuration (1). Click Save (2). Please click “Save” to save the configuration to your computer. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 68 (3). Select the location which you want to save file, then click Save. Load configuration file (1). Click Choose File (2). Select configuration file then click Open User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 69 (3). Click Upload to upload configuration file to SAPIDO GR-1733. (4). After 90 seconds, SAPIDO GR-1733 will reboot automatically. Reload factory default setting (1). Please click Reset (2). Please click OK to start reload factory default setting to SAPIDO GR-1733. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 70: Time Zone Setting
(3). After 90 seconds, SAPIDO GR-1733 will reboot automatically. 6.3.4 Time Zone Setting Users can synchronize the local clock on the router to an available NTP server (optional). To complete this setting, enable NTP client update and select the correct Time Zone. -
Page 71: Upnp Setting
(data sharing, communications, and entertainment) and in corporate environments for simplified installation of computer components. SAPIDO GR-1733 supports UPnP function, and can cooperate with other UPnP devices. When you activate UPnP, please click My Network Places. Users will see an Internet Gateway Device icon. -
Page 72: Language Setting
6.3.7 Language Setting The SAPIDO GR-1733 provide 12 language for Web GUI. You can select the language interface from the dropdown list and by following steps. When you see the screen message change to the selected language, the setup is completed. -
Page 73: Network Config
The category provides Network Config and Event Log status for users to know the operation status. 6.4.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP …information. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 74: Event Log
Click on Apply Changes to save the setting data. Click on Refresh to renew the system time, or on Clear to clear all the record. Clear * The following figure is an example when users click Apply Changes to record the event log. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 75: Logout
Logout This function logs out the user. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 76: Chapter 7 Samba Server
Chapter 7 Samba Server The SAPIDO GR-1733 is able to act as a Samba server to share the file on USB storage in local network. How to use SAPIDO GR-1733 as a Samba server Plug in the USB hard disk/Flash. -
Page 77: Chapter 8 Ddns Service Application
If you don’t have a DDNS account, please follow the steps to complete your DDNS with Dynamic IP settings. http://www.dyndns.com/ First access the Internet and fill into the address field of your web browser, then click Create Account. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 78 Fill in the form as required, and then click on Create Account button. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 79 When you got this account created message, close it, and check your mailbox. You would get a mail from DynDNS website. Click on the indicated address within your mail to confirm. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 80 Click on login. Click My Services after logging in. Click Add New Hostname. Put in your favorite hostname and service type, and then click Create Host after finished. User Manual v1.0.0 http://www.sapido.com.tw/...
- Page 81 Your hostname has been created when you see the following page. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 82: Chapter 9 Q & A
IP address and LAN cable, the changes cannot be made, or password is lost. A: In case SAPIDO GR-1733 is inaccessible; you can try to restore its factory default settings. Please press the “Reset” button and keep it pressed for over 7 seconds and the light of STATUS will vanish. -
Page 83: Os Setting
A: There are two ways to know. Way 1: Check with your Internet Service Provider. Way 2: Check the setting screen of SAPIDO GR-1733. Click on Status & Log item to select Network Configuration on the Main Menu. WAN IP is shown on the WAN interface. - Page 84 5. Select Direct connection to the Internet and click on OK button. 6. Click on OK button. Web page hangs, corrupt downloads, or nothing but junk characters is being displayed on the screen. What do I need to do? User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 85: Sapido Gr-1733 Setup
Q: Why does SAPIDO GR-1733’s setup page shut down unexpectedly? A: If one of the pages appears incompletely in SAPIDO GR-1733 ’s setup pages, please click on Logout item on the Main Menu before shutting it down. Don’t keep it working. -
Page 86: Wireless Lan
IP information to the NIC. As a result, I was able to connect to the network, but could not browse the web. The point is, don't assume anything. Verify for yourself that all of the required settings are being received by the workstation. User Manual v1.0.0 http://www.sapido.com.tw/... - Page 87 Any “noisy” devices should be shielded or relocated. RF Shielding: Your environment may tend to block transmission between the wireless stations. This will mean high access speed is only possible when close to the Access Point. User Manual v1.0.0 http://www.sapido.com.tw/...
-
Page 88: Support
A: The default WEP of WinXP is Authentication Open System - WEP, but the WEP of SAPIDO GR-1733 is only for Shared Key - WEP, it caused both sides couldn’t communicate. Please select the WEP of WinXP from Authentication Open System to Pre-shared Key - WEP, and then the WEP wireless interface between WinXP and SAPIDO GR-1733 would be communicated. -
Page 89: Others
In this situation, we suggest to disable DHCP server in router and configure your PC manually. USB Device Q: How many USB devices can be connected to the Product? A: SAPIDO GR-1733 has 1 USB ports. User Manual v1.0.0 http://www.sapido.com.tw/... -
Page 90: Chapter 10 Appendices
FireFox ver. 2.0.0.11 and the following related versions.3. Safari ver. 3.04 and the following related versions. 10.3 Communications Regulation Information Should any consumers need to learn more information, services and supports, please contact the supplier of your product directly. User Manual v1.0.0 http://www.sapido.com.tw/...