Connecting Gr297N; Network Setup; Windows 2000 - Sapido GR297n User Manual

Please confirm the network environment or the purpose before setting this product.
2.2 Connecting
Prepare the followings before the connection:

PC or Notebook for setup

Ethernet cable
1. Make sure you are under "Router Mode".
2. Connect GR297N to xDSL/ Cable modem with the Ethernet cable, WAN to LAN.
3. Turn on your Computer.
2.3

Network setup

After the network connection is built, the next step is setup the router with proper network
parameters, so it can work properly in your network environment. Before you connect to the
wireless router and start configuration procedures, your computer must be able to get an IP
address from the wireless router automatically (use dynamic IP address). If it's set to use
static IP address, or you're unsure, please follow the below instructions to configure your
computer with dynamic IP address:
If the operating system of your computer is....

Windows 2000

Windows XP
Windows Vista/Win7
2.3.1 Windows 2000
http://www.sapido.com.tw/
GR297N
- please go to section 2.3.1
- please go to section 2.3.2
- please go to section 2.3.3
10
User Manual v1. 0.0