PPTP Pass-through
L2TP Pass-through
Apply Changes & Reset &
Refresh
6.3.7
Language Setting
The SAPIDO GR-1733 provide 12 language for Web GUI. You can select the language
interface from the dropdown list and by following steps.
When you see the screen message change to the selected language, the setup is completed.
6.4
Log & Status
http://www.sapido.com.tw/
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
Point-to-Point Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PPTP Pass-through, select Disable.
To allow the L2TP network traffic to be forwarded to its destination
without the network address translation tasks.
Please click on Apply Changes to save the setting data. Or you
may click on Reset to clear all the input data.
72
User Manual v1.0.0