Functions Window; Status Messages; Hdd Recording - Panasonic Diga DMR-EH50 Operating Instructions Manual

Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
§
Progressive ( 68)
Select "On" to enable progressive output.
Select "Off" if the picture is stretched horizontally.
§
Transfer [When "Progressive" (
Select the method of conversion for progressive output to suit
the type of title being played (
When the output signal is PAL
≥Auto:
Detects 25 frame-per-second film content and
appropriately converts it.
≥Video:
Select when using "Auto", and the video
content is distorted.
When the output signal is NTSC
≥Auto1
Detects 24 frame-per-second film content and
(normal): appropriately converts it.
≥Auto2:
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
≥Video:
Select when using "Auto1" and "Auto2", and
the video content is distorted.
AV-in NR (Only when AV1, AV2, AV3 or AV4 is selected)
Reduces video tape noise while transferring (dubbing).
≥Automatic: Noise reduction only works on picture input
from a video tape.
≥On:
Noise reduction works for input video.
≥Off:
Noise reduction is off. You can record the input
signal as it is.
§
Only when you have set "Progressive" to "On" in the SETUP menu
( 20).
Sound menu—Change the sound effect
V.S.S.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›]
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
≥Turn V.S.S. off if it causes distortion. (Check the surround
function on the connected equipment.)
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer
[RAM] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
Other menu—Change the display position
Position
1–5: The higher the setting the lower the on-screen menu
moves.
above) is set to "On".]
68, Film and video).

FUNCTIONS window

By using the FUNCTIONS window you may access the main
functions quickly and easily.
1
While stopped
Press [FUNCTIONS].
Functions displayed depend on the selected drive or type of
disc.
FUNCTIONS HDD
HDD
Playback
DIRECT NAVIGATOR
Recording
EPG GUIDE Plus+
TIMER RECORDING
2 3
ShowView
1
Dubbing DUBBING
ENTER
To Others
RETURN
2
Press [3, 4] to select an item and
press [ENTER].
≥If you select "To Others" and press [ENTER], the following
screen appears.
FUNCTIONS HDD
HDD
Playback
DIRECT NAVIGATOR
Recording GUIDE Plus+
EPG
TIMER RECORDING
2 ShowView
1 3
Dubbing DUBBING
ENTER
To Others
RETURN
≥If you select "Return" and press [ENTER], you can return to
the previous screen.
To exit the FUNCTIONS window
Press [FUNCTIONS].

Status messages

Press [STATUS].
The display changes each time you press the button.
Selected drive/type of disc
HDD
Recording or play status/input channel
REC
PLAY
TV audio type being received (
STEREO
Selected audio type
L R
Recording drive/
DVD REC
Transfer (dubbing) progress indicator
Title number and elapsed time during play/
Recording mode
Date and time
π
Remain
18:53:50 11.10.
π T1 π T2
0:05.14 XP
Title number and elapsed time during
recording/Recording mode
No display
≥TV audio type
STEREO: STEREO/NICAM stereo broadcast
M 1/M 2: Bilingual/NICAM dual-sound broadcast
M 1:NICAM monaural broadcast
Disc Remaining
30:00 SP
Disc Remaining 30:00 SP
PLAYLISTS
FLEXIBLE REC
SETUP
DISC MANAGEMENT
Return
below)
Available recording time and
recording mode
13:50 XP
0:00.10 XP
RQT8027
37