Log Placement - Napoleon GDS50N Installation And Operating Instructions Manual

30
5.2

LOG PLACEMENT

FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
Place the 2 piece charcoal ember strip along
5.2.1
the edge of the fi rebox
Align the square peg on log #2 with the notch
5.2.3
on the base log..
Finally, align the square peg on log #4 with
5.2.5
the notch on the left end of the base log.
W415-0098 / E / 06.28.10
DAMAGE OR PERSONAL INJURY.
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
WARNING
!
Place the base log #1 between the log
5.2.2
supports, ensuring that it is pushed back against the
back of the supports.
Align the square pegs on log #3 with the
5.2.4
notches on the right end of the base log.
76.1A