Log Placement - Napoleon Ascent BX36 Installation Manual

10.6

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that
is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing ef-
fect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat-activated curing process. Blocked burner ports can cause an incorrect fl ame
pattern.
Stud (Log #1)
Night
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
Light (x2)
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
C1
Stud
(Log #3)
Burner Ports
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
A1
B1
Stud
(Log #2)
Burner Overview
Pilot Shield
A2
B2
D1
(Log #4)
fi nishing
Stud (Log #1)
Stud (Log #2)
D2
Studs
W415-2944 / A / 04.26.22
EN
57