Philips Saeco Intelia HD8751 User Manual page 48

Intelia coffee machine
Hide thumbs Also See for Saeco Intelia HD8751:
Table of Contents

Advertisement

ENGLISH
46
Machine actions
The machine grinds the
coff ee beans but no coff ee
comes out.
(See note)
Coff ee is too weak.
(See note)
Coff ee is brewed slowly.
(See note)
Coff ee leaks out of the dis-
pensing spout.
Causes
There is no water.
The brew group is dirty.
The circuit is not primed.
This might occur when the ma-
chine is automatically adjusting
the dose.
The dispensing spout is dirty.
This might occur when the ma-
chine is automatically adjusting
the dose.
The coff ee grind is too fi ne.
The circuit is not primed.
The brew group is dirty.
The dispensing spout is clogged.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Solutions
Fill the water tank and prime the
circuit (see the "Using the Machine
for the First Time" chapter).
Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Brew a few cups of coff ee as
described in the "Saeco Adapting
System" chapter.
Clean the dispensing spout.
Brew a few cups of coff ee as
described in the "Saeco Adapting
System" chapter.
Change coff ee blend or adjust the
grind as explained in chapter "Ad-
justing the Ceramic Coff ee Grinder".
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).
Clean the dispensing spout and its
holes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents