Philips Saeco Intelia HD8751 User Manual page 20

ENGLISH
18
3 Set the fi lter according to the measurements performed (see previous
chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
4
Insert the fi lter into the empty water tank. Press it down until it cannot
move any further.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense all the water of the tank by using the hot water function (see
the "Hot Water Dispensing" chapter).
7
Fill the water tank again.
8
Press the " " button and scroll the pages by pressing the "
ton until the following screen is displayed.
9 Press the " " button to select "ON" and press the "
confi rm.
10
To exit, press the " " button.
In this way the machine has been programmed to inform the user of the
need to replace the "INTENZA+" water fi lter.
" but-
" button to