Preparing For Use; Machine Packaging; Machine Installation - Philips Saeco Intelia HD8751 User Manual

ENGLISH
10

PREPARING FOR USE

Machine Packaging

The original packaging has been designed and constructed to protect the
machine during transport. We recommend keeping the packaging material
for possible future transport.

Machine Installation

1 Remove the drip tray with grill from the packaging.
2
Remove the machine from the packaging.
3
For best use, it is recommended to:
• Choose a safe, level surface, where there will be no danger of over-
turning the machine or being injured.
• Choose a location that is suffi ciently well-lit, clean and near an eas-
ily reachable socket.
• Allow for a minimum distance from the sides of the machine as
shown in the illustration.
4
Insert the drip tray with grill into the machine. Make sure it is fully
inserted.
Note:
The drip tray collects the water that comes out of the dispensing spout
during each rinse/self-cleaning cycle, as well as any coff ee that might be
spilled during beverage brewing. Empty and wash the drip tray daily and
each time the full drip tray indicator is raised.
Caution:
NEVER remove the drip tray when the machine has just been turned
on. Wait a couple of minutes for the machine to carry out a rinse/self-
cleaning cycle.