Philips Saeco Intelia HD8751 User Manual page 45

Intelia coffee machine
Hide thumbs Also See for Saeco Intelia HD8751:
Table of Contents

Advertisement

Ready Signals (Green Colour)
Warning Signals (Yellow Colour)
The machine is programming the amount of coff ee to be brewed.
Coff ee brewing using pre-ground coff ee in progress.
The machine is in warm-up phase to brew beverages or dispense hot water.
The machine is in warm-up phase during beverages programming.
The machine is performing the rinse phase. Wait until the machine has com-
pleted the cycle.
The machine needs the "INTENZA+" water fi lter to be replaced.
The brew group is being reset due to machine reset.
Refi ll the coff ee bean hopper with coff ee beans and restart the cycle.
Prime the circuit.
The machine needs to be descaled. Press the
descaling menu. Follow the steps described in the "Descaling" chapter of this
manual.
If you want to descale later, press the
machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
ENGLISH
button to enter the
"
"
button to continue using the
"
"
43
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents