Hunter 41949-01 Installation Manual page 9

B17
B19
Fan Motor
Night Light
Light
*Option Fan & Main Light Together
B20
H
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the
011_41949_EngS_2-12-08.indd 9
Tighten screws.
Black
2 Pin
White
White
Red Night Light
3 Pin
Black Light
*Option
Connect wires as shown.
G
wiring cover plate.
41949-01 02/12/2008
B18
Route wires through strain relief. For supply connection, use
wires suitable for at least 90º C (194º F).
Ground
Green
A
Bare Copper
Black Main Switch 1 (AC In)
Red Switch 1 (AC In)
Black Switch 2 (AC In)
B21
Connect 4" duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
9
White
2/12/08 2:43:42 PM