Hunter 41949-01 Installation Manual page 18

E3
position the strain relief bracket between the plugs as
shown, and screw into place.
E5
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
E7
Align tabs on glass dome assembly with slots on light
fixture, and insert tabs into slots.
011_41949_EngS_2-12-08.indd 18
K
N
Attach thumbscrews.
O
41949-01 02/12/2008
E4
M
Align posts A, B, C and D (stamped into motor housing)
with posts A, B, C and D (stamped into light fixture).
Slide light fixture over posts.
E6
Install 2 Max 60 watt A-15 bulbs (Not Included).
E8
Turn glass dome assembly as shown until it locks
into position.
18
2/12/08 2:44:08 PM