Log Assembly - Heatilator CNXT4236IT Owner's Manual

Place the rockwool.
• See Figures 12.1 and 12.4.
• Place a small amount of 1/2 in. diameter pieces (dime-size)
of rockwool on the burner pan so that rockwool touches
but does not cover the holes in the burner pan.
• It is not necessary to use the entire bag. Save the
remaining amount for future use.
Figure 12.4 Placement of Rockwool
WARNING
Explosion Risk
• Follow rockwool placement instructions
in this manual.
• Do NOT place rockwool directly over
burner ports.
• Replace rockwool material annually.
Improperly placed rockwool interferes with
proper burner operation.
54 Heatilator • Caliber CNXT Series • 4047-132 Rev P • 11/07
F. Log Assembly
• Base logs have been permanently mounted on the grate
assembly and should not be moved. See Figure 12.5.
Figure 12.5 Base Logs
• Install "Y" log on left hand side of grate using locating pins
to position. See Figure 12.6
Figure 12.6 Placing Left Top Log
• Install right top log as shown in Figure 12.7 using locating
pins to position log properly.
Figure 12.7 Placing Right Top Log