Installing The Ceiling Mounting Plate - Hunter 42798-01 Owner's Manual

2.1
CAUTION: To avoid possible electrical shock, before installing your fan,
disconnect the power by turning off the circuit breakers to the outlet box
and associated wall switch location. If you cannot lock the circuit breakers
in the off position, securely fasten a prominent warning device, such as a
tag, to the service panel.
2.3
Your ceiling mounting plate (2) comes with four pre-installed noise
isolators (71). Check to make sure all four isolators are in place and were
not removed during shipment.
2 • Installing the Ceiling Mounting Plate
71
2
5 5
42798-01 • 09/16/09 • Hunter Fan Company
2.2
Drill two 9/64" pilot holes into the wood support structure through the
outermost holes in the outlet box.
2.4
Thread the lead wires from the outlet box down through the hole in the
middle of the ceiling mounting plate (2).
2