1. Manuals
  2. Brands
  3. Hunter Manuals
  4. Fan
  5. 42798-01
  6. Owner's manual

Hunter 42798-01 Owner's Manual

Hunter fan ceiling fan owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Table of Contents

1 • Getting Ready ..................................................................................................................................................................................................................................................... 2
2 • Installing the Ceiling Mounting Plate ......................................................................................................................................................................................................5
3 • Assembling and Hanging the Fan .............................................................................................................................................................................................................7
4 • Setting the Remote Transmitter and Receiver ....................................................................................................................................................................................9
5 • Wiring the Fan ...................................................................................................................................................................................................................................................11
6 • Installing the Ceiling Plate Cover.............................................................................................................................................................................................................13
7 • Assembling the Blades ..................................................................................................................................................................................................................................14
TM
..........................................................................................................................................................................................................................15
Without a Bowl Light Fixture ...........................................................................................................................................................................................................................16
10 • Operation & Maintenance .......................................................................................................................................................................................................................20
1
42798-01 • 09/16/09 • Hunter Fan Company

Advertisement

Table of Contents
loading

Related Manuals for Hunter 42798-01

Summary of Contents for Hunter 42798-01

  • Page 1: Table Of Contents

    6 • Installing the Ceiling Plate Cover...13 7 • Assembling the Blades ...14 8 • Activating Auto Balance ...15 9 • Completing Your Installation With or Without a Bowl Light Fixture ...16 10 • Operation & Maintenance ...20 42798-01 • 09/16/09 • Hunter Fan Company...

  • Page 2: Getting Ready

    For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4” diameter pipe to assure stability and wobble-free performance For quiet and optimum performance of your Hunter fan, use only Hunter speed controls and accessories. WARNING! • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING...
  • Page 3 If you want to use an existing fan site, complete the following checklist to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
  • Page 4 3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling. 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.

  • Page 5: Installing The Ceiling Mounting Plate

    (71). Check to make sure all four isolators are in place and were not removed during shipment. 42798-01 • 09/16/09 • Hunter Fan Company Drill two 9/64” pilot holes into the wood support structure through the outermost holes in the outlet box.
  • Page 6 Do not over tighten. Unbundle the wires from the fan. Note: Your Hunter fan comes with an optional pipe/ball assembly extension pipe. If you are hanging the fan on a ceiling higher than 10 feet tall and you would like to use the enclosed optional pipe/ball assembly, –...

  • Page 7: Assembling And Hanging The Fan

    (7)is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Raise the fan and align the slots in the ceiling mounting plate cover (3) with the hooks on the ceiling mounting plate (2). Note: To hang the fan,...
  • Page 8 42798-01 • 09/16/09 • Hunter Fan Company Optional Pipe/Ball Instructions: Your Hunter fan comes with an optional pipe/ball assembly extension pipe. If you would like to use the enclosed optional 6 inch pipe/ball assembly, follow Steps 3.6-3.9. Note: The Auto Balance designed for pipe/ball assemblies that are 6”...

  • Page 9: Setting The Remote Transmitter And Receiver

    4 • Setting the Remote Transmitter and Receiver IMPORTANT! Before you change the DIP switch settings, make sure the battery is not connected to the transmitter. 42798-01 • 09/16/09 • Hunter Fan Company 3.10 Optional Pipe/Ball Instructions: Reassemble the ground wire, wedge, pin, ball, and pipe ball screw, in that order, onto the long pipe/ball assembly.
  • Page 10 The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Wiring The Fan

    (70) over them, then twist clockwise until tight. For all these connections use the wire connectors provided. 42798-01 • 09/16/09 • Hunter Fan Company 5 • Wiring the Fan Using a large wire connector (70), connect the ground wire (grounding)
  • Page 12 5 • Wiring the Fan Using the small wire connectors (70), connect the wires from the fan as follows: • The black wire with a white stripe from the fan to the red wire from the receiver (marked on white tag “LIGHT OUT”) •...

  • Page 13: Installing The Ceiling Plate Cover

    Groove Rotate the pipe/ball assembly (7) so the tab in the ceiling mounting plate cover (3) is secure in the hanger ball groove. Note: Your fan may have multiple tabs and grooves that must be aligned. Holding the ceiling mounting plate cover (3) up with the screw holes aligned, partially install two ceiling mounting plate cover screws (62) into the holes opposite the ceiling mounting plate tabs.

  • Page 14: Assembling The Blades

    Squeeze the rubber blade grommets (66) into the holes in the blades (46). 42798-01 • 09/16/09 • Hunter Fan Company Should you need to remove the trim ring, press firmly on opposite sides of the trim ring (4) directly above the groove in the hanger ball.

  • Page 15: Activating Auto Balance

    Repeat this process for all 5 retaining screws. 42798-01 • 09/16/09 • Hunter Fan Company Slide the blade arms (98) onto the blade-to-arm screws (47). Tighten the blade-to-arm screws (47) as tight as possible with a screwdriver.

  • Page 16: Completing Your Installation With Or Without A Bowl Light Fixture

    Feed the upper plug connector through the center opening of the upper switch housing (30). Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
  • Page 17 9 • Completing Your Installation With or Without a Bowl Light Fixture (cont.) Connect the upper plug connector from the fan body to the lower plug connector in the lower switch housing assembly (31). Install the included Pin-Based CFL bulb (259), 26 Watt Maximum, into the socket.
  • Page 18 9.10 Screw the finial (149) onto the threaded finial rod end until tight. 42798-01 • 09/16/09 • Hunter Fan Company Place the cover plate (148) up against the glass bowl (150). Align the holes in the cover plate (148) with the grommet hole of the metal disc..
  • Page 19 Removing the Light Fixture Pull the large (male) plug connector through the hole in the center of the lower switch housing. Then, pull out the small (female) connector. 42798-01 • 09/16/09 • Hunter Fan Company 9.12 Removing the Light Fixture Unscrew the light bulb socket.
  • Page 20 Or, you can simply mount the remote holder on the wall. 42798-01 • 09/16/09 • Hunter Fan Company After your installation is complete, restore power to the fan. Wash your hands after installing the fan.

  • Page 21: Operation & Maintenance

    1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42798-01 • 09/16/09 • Hunter Fan Company Airflow Direction Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze.
  • Page 22 Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42798-01 • 09/16/09 • Hunter Fan Company Troubleshooting Problem: Nothing happens; fan does not move. • Turn power on, replace fuse, or reset breaker. • Loosen canopy, check all connections according to the wiring the fan section.

Table of Contents