Leds - Electrolux WASHING-MACHINES & WASHER-DRYERS Service Manual

6.5

LEDs

These LEDs display different information depending on machine configuration; the end-of-cycle LED is
present on all models.
Type of LED
This LED lights up if the selected programme includes a prewash, and lights up during the
Prewash
prewash phase when the programme is executed.
This LED lights up if the selected programme includes a wash phase, and lights up during
Wash
the wash phase when the programme is executed.
Prewash/ This LED lights up if the selected programme includes a prewash or wash phase, and
Wash lights up during the prewash or wash phase when the programme is executed.
This LED lights up if the selected programme includes rinses, and lights up during the
Rinse
rinses when the programme is executed.
This LED lights up if the selected programme includes a spin phase, and lights up during
Spin
the spin phase when the programme is executed.
This LED lights up if the selected programme includes a drain phase, and lights up during
Drain
the drain phase when the programme is executed.
This LED lights up when the programme is chosen if an extra rinse has been
Extra rinse selected/stored (if an extra rinse is included in the programme), and lights up during the
extra rinse when the programme is executed.
This LED lights up when the programme is chosen if this option has been selected, and at
Rinse Hold
the end of the cycle when the machine stops with water in the drum.
Cycle in
This LED lights up while the programme is being executed.
progress
End of cycle This LED lights up at the end of the cycle; it is also used to signal alarms.
Filter clogged This LED lights up at the end of the cycle if the drain filter is clogged.
Detergent
This LED lights up at the end of the cycle if too much detergent has been used.
overload
ON/OFF This LED lights up when the machine is switched on.
This LED lights up when the door is locked by the safety system.
The LED switches off when the door is no longer locked.
Door
The LED flashes while the door is being unlocked (which occurs masterly on models
with a safety system equipped with a PTC)
This LED lights up when the display is showing the time remaining until the end of the
Time until end
of cycle cycle.
Lights during selection if the programme includes a drying cycle and during the cycle when
Drying
it is in progress.
SOI/DT 2005-01 dmm
Function
17/67 599 36 82 59