Model Identification; Specifications; Unpacking - Raypak 106 Installation & Operating Instructions Manual

WARNING: Use of any parts not manufactured
and/or approved by the manufacturer may cause
non-warrantable damage.
Ambient Temperature Rating of
Components
• Analog heater -40°F to +175°F (-40°C to 79.4°C)
• Electronic heater -32°F to +175°F (-35.5°C to
79.4°C)

Model Identification

The model identification number and heater serial
number are found on the heater rating plate.
Fig. 2: Location of Heater Rating Plate
The model identification number will be similar to the
example shown below:
P - R 106 A - E N - C
Plastic Header
R = Raypak
M = Rheem
D = Ruud
Model No.
Model Rev.

Specifications

Model

Unpacking

On receipt of the heater it is suggested that visual
checks are made for external damage to the shipping
carton. If the carton is damaged, make a note to that
effect on the Bill of Lading when signing for the ship-
ment. Remove the heater from the shipping
packaging. Report any damage to the carrier immedi-
ately.
On occasion, items are shipped loose. Be sure that the
correct number of packages are received, as indicated
on the Bill of Lading.
Claims for shortages and damages must be filed with
the carrier by consignee. Authorization to return goods
must be received from the factory prior to shipping.
Goods returned to the factory without an authorized
Returned Goods Receipt number will not be accepted.
All returned goods are subject to a restocking charge.
When ordering parts, specify the model and serial
number of the heater. When ordering under warranty
conditions, specify the date of installation. Records of
the installation must be provided, when requested, to
substantiate a claim.
C = Copper
Debits for defective replacement parts will not be
accepted and will only be replaced in kind per the
N = Natural
manufacturer's standard warranties.
P = Propane
E = Electronic
A = Analog
7
Gas
Input* Conn.
No.
(NPT)
105,000
BTU/hr.
106
(30.75
KW)
1/2 in.
(1.27
cm)
150,000
BTU/hr.
156
(43.93
KW)
Table B: Specifications
Shipping Weight
Water
Std.
Conn.
Heater w/ Drafthood
(NPT)
Stackless Assembly
Top
85 lbs.
(38.6 kg)
1-1/2 in.
or 2 in.
14 lbs.
(3.8cm
(6.35 kg)
or 5
cm)
100 lbs.
(45.4 kg)