Burner Tray Removal; Gas Valve Removal - Raypak 106 Installation & Operating Instructions Manual

Burner Tray Removal

1 Shut off main electrical power switch to heater.
2 Shut off gas upstream of heater.
3 Remove front door
4 Disconnect gas line from gas valve.
5 Remove (3) screws holding the anti-rotation brack-
et in place.
6 Remove bracket an set aside.
7 Remove (4) screws as shown in the image.
8 Disconnect wiring from gas valve.
9 Remove (2) screws holding the control panel up.
10 Flipthe control panel forward.
11 Disconnect ignition wire and remove with burner
tray.
12 Reverse above procedure to reinstall.
Fig. 26: Burner Tray Assembly

Gas Valve Removal

1 Remove burner tray.
2 Disconnect pilot tubing from gas valve
3 Rotate the gas valve counter clockwise to
remove valve from nipple.
4 Reverse above procedure to reinstall.
28
Fig. 27: Gas Valve Removal