Table of Contents
Advertisement
Mitel IP Phone User Reference Guide
2. When the system is ready for you to begin your page, you will hear an alert tone and the
phone LCD screen displays the number of phones being paged.
Paging: 7 of 10
3. Speak into the handset or the speakerphone.
4. To end the page, you have the following options:
•
Replace the handset if using the handset.
•
Select the Speaker key on the 5020/5220 IP phone or the
phone if using the speakerphone.
•
Select the END softkey.
Note: A page is not broadcast on phones that are busy.
If you select Page while there is already a page in progress, the system waits until the
page in progress is completed before your page is started. Your phone displays "Calling:
Site Page" and you hear ringing while you are waiting.
On the phones receiving a page, the phone LCD screen displays the name of the user
who originated the page and an END softkey. The user receiving the page can stop the
page to their phone by selecting the END softkey.
Page from: Karen Gr
Park and retrieve
Using Park and Retrieve, you can put a call on hold at a park location so that it can be retrieved
from any other phone at your business. To use this feature, a memory key must be programmed
as a Park/Retrieve key
To put a call on hold at a park location, follow this step:
•
While on an active call, select a memory key programmed with the Park/Retrieve feature.
The system places the call on hold at a park location.
The park location is displayed on your phone LCD.
Parked at: 4
You are no longer connected with the caller and your phone returns to the idle state.
To retrieve a parked call, follow these steps:
1. From an idle phone, lift the handset. This will select the next available Line Appearance.
Select a memory key programmed with the Park/Retrieve feature. The phone LCD screen
displays:
Park Location:
48
END
END
QUIT
key on the 5224 IP
Advertisement
Table of Contents
