BBQ GSC3219TA Owner's Manual page 13

Step 11
a) Open the side burner lid and
place the side burner
assembly (R) on the right side
shelf. Make certain the venturi
tube is connected properly
with valve.
b) Align the holes on the side
burner assembly with the
holes on the right side shelf.
c) Insert one bolt (EE) with one
spring washer (GG) and one
flat washer (FF) into each
pre-drilled hole. Tighten bolts
by hand until secure.
d) Go back to tighten all the bolts
using screwdriver provided.
M4×15 bolt
EE
M4 spring washer
GG
M4 flat washer
FF
Step 12
a) Align the holes on the bottom
of side burner assembly with
the holes on the side valve
nozzle bracket. Make certain
the venturi tube is connected
properly with side valve
nozzle.
b) Insert one bolt (BB) and one
flat washer (CC) into each
pre-drilled hole. Tighten bolts
by hand until secure.
c) Go back to tighten all the bolts
using screwdriver provided.
d) Insert the ignition cable onto
the electrode.
M6×15 bolt 2 PCS
BB
M6 flat washer 2 PCS
CC
GSC3219TA
Owner's Manual
4 PCS
4 PCS
4 PCS
12