Configuring Parameterized Qos Policy Through Radius - Cisco ASR 9000 Series Configuration Manual

Configuring Parameterized QoS Policy Through RADIUS

QoS Action
Parameter
Set MPLS exp
topmost bit
Set MPLS exp
imposition bit
Set Tunnel
precedence
Set Tunnel
DSCP
Configuring Parameterized QoS Policy Through RADIUS
Perform this task to deploy parameterized QoS policy and apply subscriber settings through the RADIUS
server. These steps are performed on the RADIUS server for each subscriber.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.2.x
114
Qualifiers Commands
CLI Equivalent set discard-class <discard-class-val>
RADIUS qos-policy-out:add-class(sub,(class-default,voip), set-dclass (4))
Equivalent -
Example
QoS Action set-mpls-exp-topmost (<mpls-exp- topmost-val>)
CLI Equivalent set mpls experimental topmost <mpls-exp- topmost-val>
RADIUS qos-policy-out:add-class(sub,(class-default,voip), set-mpls-exp-topmost
Equivalent - (4))
Example
QoS Action set-mpls-exp- imposition (<mpls-exp-imposition-val>)
CLI Equivalent set mpls experimental imposition <mpls-exp- imposition-val>
RADIUS qos-policy-out:add-class(sub,(class-default,voip), set-mpls-exp-
Equivalent - imposition (4))
Example
QoS Action set-tunnel-prec(<prec-val>)
CLI Equivalent set precedence tunnel <precedence-val>
RADIUS qos-policy-out:add-class(sub,(class-default,voip), set-tunnel-prec(4))
Equivalent -
Example
QoS Action set-tunnel-dscp (<dscp-val>)
CLI Equivalent set dscp tunnel <dscp-val>
RADIUS qos-policy-out:add-class(sub,(class-default,voip), set-tunnel-dscp(4))
Equivalent -
Example
Deploying the Quality of Service (QoS)
OL-26148-02