Configuring Aaa Attribute Format Function; Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide - Cisco ASR 9000 Series Configuration Manual

Configuring AAA Attribute Format Function

Command or Action
Configuring RADIUS Attribute Format: An example
configure
aaa radius attribute
nas-port format e abcd type 40
nas-port-id format ADEF
!
end
Configuring AAA Attribute Format Function
Perform this task to configure a function for the AAA attribute format. The function is for stripping the
user-name till the delimiter.
SUMMARY STEPS
1. configure
2. aaa attribute format format-name
3. username-strip prefix-delimiter prefix_delimiter
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
aaa attribute format format-name
Example:
RP/0/RSP0/CPU0:router(config)# aaa
attribute format red
Step 3 username-strip prefix-delimiter prefix_delimiter
Example:
RP/0/RSP0/CPU0:router(config-id-format)#
username-strip prefix-delimiter @

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,

Release 4.2.x
24
Configuring Authentication, Authorization, and Accounting Functions
Purpose
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Purpose
Enters global configuration mode.
Specifies the format name for which the function is defined.
Configures the function to strip the username preceding the prefix
delimiter, which is @.
OL-26148-02