Setting The Dialing Mode; Using The Belt Clip - Radio Shack 43-3502 Owner's Manual

43-3502.fm Page 10 Wednesday, December 1, 1999 8:54 AM
SETTING THE DIALING
MODE
Set on the side of the base
TONE-PULSE
for the type of service you have. If you are
not sure which type you have, do this sim-
ple test after charging the battery.
1. Set to .
POWER ON
2. Set to
TONE-PULSE
3. Lift the remote keypad from the base.
Then press
TALK/HANG UP
for a dial tone.
4. Press any number other than 0.
If the dial tone stops, you have touch-
tone service. Leave
to .
TONE
If the dial tone continues, you have
pulse service. Set
.
PULSE
10

USING THE BELT CLIP

Use the belt clip to hang the remote key-
pad on your belt or waistband for hands-
free carrying.
TONE-PULSE
.
TONE
and listen
set
TONE-PULSE
to
TONE-PULSE