4.6 Mute A Call; 4.7 Turn The Handset Ringer Off; Redial A Number From The Redial List; Save A Redial Number Into The Phonebook - iDect Z1 Series User Manual

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
During a call:
Press <UP> or <DOWN> to increase or decrease the volume level respectively. The current
setting is shown. When you end the call, the volume settings will still remain at the last
selected level.

4.6 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <Mute/Left Soft key> to mute the microphone. The display will show "Call Muted" and
your caller cannot hear you.
Press <Unmute/Left soft key> again to unmute the microphone.

4.7 Turn the Handset Ringer Off

In idle mode, press and hold <#> to turn off the handset ringer.
The "RINGER OFF" icon is displayed on the LCD.
4.8 Redial
The last 20 numbers dialled are saved in the Redial list. If you have stored a name in the
phonebook that matches the number, the name will be displayed instead.
4.8.1

Redial a number from the redial list

1. Press <DOWN> to access the redial list.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows "List Empty" .
4.8.2

Save a redial number into the phonebook

1. Follow steps 1 and 2 in section 4.8.1.
2. Press <Select> to select the redial number.
3. Press <Menu> and <UP/DOWN> to scroll to Add to PB.
4. Press <Select> and then enter the name, edit the number if necessary and select the melody.
Note: Press <DOWN> after entering the name to go to the next step of editing the number, and
then press <DOWN> to go to the final step of selecting the melody. Press <RIGHT> or <LEFT>
to scroll through the melody options.Name and number must be entered in order to save a new
phonebook entry.
5. Press <OK> to save the redial number into the phonebook.
4.8.3

Delete a redial number

1. Follow steps 1 to 2 in section 4.8.2.
2. Press <Menu> and <UP/DOWN> to scroll to Delete.
3. Press <SELECT> and then <OK> to confirm the Delete.
4.8.4

Delete the entire redial list

1. Follow steps 1 to 2 in section 4.8.2.
2. Press <Menu> and <UP/DOWN> to scroll to Delete All.
3. Press <SELECT> and then <OK> to confirm the Delete All.
4.9 Keypad Lock
You can lock the keypad so that it cannot be used accidentally while carrying it around, but you
will still be able to answer an incoming call.
1. To lock the keypad: In idle mode, press and hold <*> key, the <Keypad lock icon>will display.
2. To unlock the keypad: In idle mode, press and hold <*> key, the <keypad lock icon> will
disappear.

4.10 Find Handset

You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will ring up for 60 seconds and "Paging" is displayed on the LCD.
You can stop the paging by pressing any key on the handset except <Silent / Right soft key>
or pressing <PAGE> on the base .
1 1