Bottom Lock Zoom Mode; Manual Mode - Humminbird Legend 1000 Operating Instructions Manual

USING THE LEGEND 1000 SERIES
BOTTOM LOCK ZOOM MODE / MANUAL MODE

Bottom Lock Zoom Mode

(Bottom Lock)
B L
TM OCK
mode tracks the bottom
similarly to Automatic
mode; however, the
display shows a full range
view on right and a
zoomed window on the
left. The zoomed window
provides added display
resolution for separating
sonar returns that are very
close together, such as
those caused by fish
suspended close to the
bottom.
As the depth changes, the
automatically keeps the bottom visible in the zoomed
window and the full range view. In the full range view,
horizontal zoom preview bars define the area of
bottom being enlarged. The default setting varies
based on the depth range; however, this setting can
be changed to show more area around the bottom, or
to show the bottom in greater detail.
To change the area of the bottom being zoomed,
follow these steps:
1. Make sure the
L
EGEND
(Bottom Lock) mode.
2. Push the knob. An adjustment indicator
R
ANGE
appears by the lower zoom preview bar, indicating
this is the selected depth limit for adjustment.
Note: Pushing the R knob toggles between the upper and
ANGE
lower zoom preview bar adjustment. If the lower zoom preview
bar is to be adjusted, push the R
3. Rotate the knob to adjust the zoom preview bar.
R
ANGE
Moving the zoom preview bars
closer together increases the
display resolution in the zoomed
window; moving them further
apart decreases
resolution, but allows more area
around the bottom to be viewed.
The indicators disappear after
several seconds with no
adjustment. The
L 1000 S
EGEND
continues to follow the bottom
using the new range. Any change
made to the zoom preview bars is
remembered until the
L
is powered off, when the
S
ERIES
unit defaults to factory settings.
8
Zoom Window Zoom Preview
Bars
Bottom Lock Zoom Mode
L 1000 S
EGEND ERIES
is operating in
1000 S
ERIES
knob until it is selected.
ANGE
display
ERIES
1000
EGEND

Manual Mode

mode turns off
M
ANUAL
automatic bottom tracking
leaving control of the
depth range to the user. Both the upper and lower
depth ranges can be adjusted to show the bottom, or
any other desired depth, in greater detail. When first
switched to
M
the current automatic depth range; however, after the
manual depth ranges have been set, the
uses the new settings until it is powered off,
S
ERIES
when it defaults to factory settings.
mode works best in areas of relatively flat
M
ANUAL
bottom or if you are trolling slowly. It is also ideal for
displaying a small area of the overall depth range in
great detail if you are looking for fish at a specific
depth.
To adjust the depth ranges manually, follow these
steps:
1. Make sure the Legend 1000 Series is operating in
Manual mode.
2. Push the Range knob. An adjustment indicator
appears at the location of the Lower Depth Range,
indicating that it is ready for adjustment.
Note: Pushing the Range knob toggles between the upper and
lower depth range selection. If the Upper Depth Range is to be
B L
TM OCK
adjusted, push the Range knob until it is highlighted.
3. Rotate the
Clockwise
counterclockwise rotation decreases the depth. The
display updates as the changes are made.
After several seconds without pressing or turning the
knob, the
D
EPTH
from the screen automatically. The
not make adjustments to keep the bottom information on-
Manual Mode
,
mode, the
L 1000 S
ANUAL EGEND
knob to adjust the Depth Range.
R
ANGE
rotation increases
adjustment indicator will disappear
R
ANGE
L
EGEND
Upper Depth Range
Adjustment Indicator
Lower Depth Range
Adjustment Indicator
defaults to
ERIES
L 1000
EGEND
the depth;
does
1000 S
ERIES