Related Manuals for Humminbird Legend 2000
Summary of Contents for Humminbird Legend 2000
- Page 1 Operations Manual Operational instructions for Humminbird Legend 2000 Series including the Legend –2000, 2005, 2000 Deep and 2005 Deep...
-
Page 2: Thank You
We encourage you to read this operation manual carefully in order to get full benefit from all the features and applications of your Humminbird product. Contact our Customer Resource Center at either 334-687-0503 or www.humminbird.com. -
Page 3: Table Of Contents
Section 1: USING The Legend 2000 Series ......2 Performance ..........2 Deep Models Additional Performance . -
Page 4: Section 1: Using The Legend 2000 Series
2' EGEND ERIES to 600' (2000' for the Legend 2000 Deep and 2005 Deep Models). Actual depth capability depends on many factors such as bottom hardness, water conditions, and transducer installation. All sonar units typically read to deeper depths in fresh water than in salt water. -
Page 5: User Interface
In UTOMATIC selects the depth range. In ERIES ONTROL depth range is selected by the user. USING THE LEGEND 2000 SERIES USER INTERFACE / KNOBS / LCD DISPLAY knob has ANGE for specific uses... -
Page 6: Chart Window
USING THE LEGEND 2000 SERIES REAL TIME SONAR™ / CHART WINDOW The sonar returns received by the displayed along the depth range scale in a ™ (RTS) W ONAR INDOW HART INDOW displays new sonar information within the transducer cone in an expanded, easy-to-see format; the... - Page 7 Note: It is important to remember that sonar cannot distinguish between a fish and some other object suspended in the water. Regardless of the object the sonar detects, it has the possibility of being drawn as an arch. USING THE LEGEND 2000 SERIES Bait fish Fish Arch Partial Fish...
-
Page 8: Control Panels
In Automatic mode, the Legend 2000 Series selects the depth range best suited to keep recent sonar returns visible; however, the depth range can be adjusted to optimize the display for viewing the second return. - Page 9 1. Make sure the Legend 2000 Series is operating in Automatic Mode. 2. Push the knob. An adjustment indicator appears at the lower...
-
Page 10: Bottom Lock Zoom Mode
To adjust the depth ranges manually, follow these steps: (Bottom 1. Make sure the Legend 2000 Series is operating in Manual mode. 2. Push the Range knob. An adjustment indicator appears at the location of the Lower Depth Range, indicating that it is ready for adjustment. -
Page 11: Chart Speed
The Light setting defaults to factory settings after the Legend 2000 Series is turned off. The factory setting full at power up and automatic decrease to Contrast enhances the... -
Page 12: Surface Clutter
USING THE LEGEND 2000 SERIES SURFACE CLUTTER / WHITE LINE / FILTER / DEPTH ALARM / TEMP ALARM White Line activates and HITE adjusts a feature which changes how 2000 S EGEND ERIES draws the bottom contour and structure, and also shows fainter sonar returns more clearly. -
Page 13: Temp Alarm
OWER Legend 2000 Series is turned off. The factory setting ° F/ 22° C. Fish Alarm (Deep Models only) LARM... -
Page 14: Language
MAINTENANCE AND WARRANTY CONTROL PANELS / MAINTENANCE/TROUBLESHOOTING also selects the units of measure for boat speed NITS and depth in one of four additional combinations supported by the International Models only: • displays depth in metres/speed in kilometres per hour. /KPH ETRES •... -
Page 15: Troubleshooting
2. The unit starts up in Simulator mode. has the ability to detect that a 2000 S EGEND ERIES transducer is connected. If, at power up, a transducer is not connected, the unit starts up in Ensure that an appropriate transducer connector is used and the connector is positioned correctly in the collector plug. -
Page 16: Warranty
We reserve the right to deem any product unserviceable when replacement parts are no longer available or impossible to obtain. This Service Policy is valid in the United States only. This applies only to Humminbird products returned to our factory in Eufaula, Alabama. This Service Policy is subject to... -
Page 17: Service Policy
• Return product freight prepaid to Techsonic Industries, Inc., using an insured carrier with delivery confirmation. Contact the Humminbird Customer Resource Center in any of the following ways: (typically we respond to your e-mail within three business days): CUSTOMER RESOURCE CENTER For OUT-OF-WARRANTY service, complete the following steps: •... -
Page 18: Section 3: Specifications Legend 2000/2005 Specifications
SPECIFICATIONS 2000/2005 SPECIFICATIONS Operating Frequency ....... 200 kHz Power Output ..... . .4000 Watts (Peak to Peak) .