Quad Layout (With Optional-Purchase Quadrabeam Plus™ Transducer, Side Beam View Only); Bottom Lock (Sonar Zoom View Only); Bottom Range (Sonar Zoom View Only, When Bottom Lock Is On) - Humminbird 1100 Series Operation Manual

Quad Layout allows you to choose how sonar information is displayed in the Side Beam View.
The Side Beam View displays sonar data from the left and right 455 kHz beams, as well as the
200 kHz down-looking beam. The sonar data can be displayed in any of the following layouts by
changing the Quad Layout setting: Default, Classic, and Slanted. See Views: Side Beam View
for more information.
NOTE: Quad Layout is only available when an optional-purchase QuadraBeam PLUS™ transducer is
attached and the Side Beam View is active (see Sonar Menu Tab: Connected Transducer).
Bottom Lock changes the mode of the zoomed view in the Sonar Zoom View. Bottom Lock
continuously graphs the bottom at a constant point on the display regardless of changes in
depth. This "flattens" out the bottom contour but is effective at showing fish on or near the
bottom.
Bottom Range allows you to control how much of the water column, measured up from the
bottom, is shown in the Sonar Zoom View. Choose a small value to see low-lying bottom
structure or details of the bottom return. Choose a larger value to see large structure in deeper
water.
NOTE: It is possible to set the Bottom Range to be greater than the depth. In this case, you may see
surface clutter in a wavy band that mirrors changes in the depth.
Sonar X-Press™ Menu
Quad Layout
(with optional-purchase QuadraBeam PLUS™ Transducer,
Side Beam View only)
Settings: Default, Classic, Slanted; Default = Default
Bottom Lock
(Sonar Zoom View only)
Settings: Off, On; Default = Off
Bottom Range
(Sonar Zoom View only, when Bottom Lock is On)
Settings: 10 to 60 feet, 2 to 10 fathoms, or 3 to 20 meters [International
Models only]; Default = 15 feet
108